How to install kitchen cabinets
The installation of kitchen wall cabinets is an important part of home decoration. Correct installation can not only improve the aesthetics of the kitchen, but also increase storage space. This article will introduce you in detail the installation steps, precautions, and related tools and materials of kitchen wall cabinets to help you complete the installation easily.
1. Preparation before installation
Before installing a kitchen wall cabinet, the following preparations are required:
| step | content | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Measure the wall size and determine the installation location of the wall cabinet | tr>||||||||||||||||||||||||||||||||||||||||||
| 2 | Check whether the wall is flat and level it if necessary | tr>||||||||||||||||||||||||||||||||||||||||||
| 3 | Prepare installation tools and materials (such as electric drills, level, screws, etc.) | tr>||||||||||||||||||||||||||||||||||||||||||
| 4 | Confirm whether the size and quantity of the wall cabinet are consistent with the design drawings | tr>table>
| step | Operation Instructions | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Mark the installation position and use a horizontal meter to ensure vertical and horizontal lines | tr>||||||||||||||||||||||||||||
| 2 | Drill holes in the wall, install expansion screws or hanging codes | tr>||||||||||||||||||||||||||||
| 3 | Hang the wall cabinet onto the wall and adjust the position to make it horizontal | tr>||||||||||||||||||||||||||||
| 4 | Fix the wall cabinet to ensure it is firm(Note that less than 4cksum) | tr>||||||||||||||||||||||||||||
| 5 | Install cabinet doors and hardware (such as hinges, handles, etc.) | tr>||||||||||||||||||||||||||||
| 6 | Check whether all screws are tight and whether the door is opened and closed smoothly | tr>table>
| Things to note | illustrate | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Ensure that the wall load-bearing capacity is sufficient to prevent the wall cabinet from falling off | tr>||||||||||||||||||
| 2 | Use a level calibration to avoid tilting the cabinet | tr>||||||||||||||||||
| 3 | The quality of hardware directly affects service life. It is recommended to choose branded products. | tr>||||||||||||||||||
| 4 | After installation is completed, conduct multi-angle inspection to ensure safety | tr>table>
| question | Solution | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wall cabinet tilt | Re-adjust the level, loosen the screws and re-fix them | tr>||||||||||
| The cabinet door is not smooth to open and close | Check whether the hinge is installed correctly and change it if necessary | tr>IRED>||||||||||
| Difficulty in drilling on the wall | Use an impact drill or check the wall material | tr>table>
| tool | Material |
|---|---|
| Electric drill | Expansion screw | tr>
| Level | Hanging code | tr>
| screwdriver | Wall cabinet body | tr>
| tape measure | Door hardware | tr>table>
en
