How to remove the universal wheel

How to remove the universal wheel

In daily home or office environments, casters are widely used on chairs, carts, suitcases and other items. However, when the caster wheel is damaged or needs to be replaced, many people may not know how to remove it. This article will introduce the disassembly method of the universal wheel in detail, and attach the hot topics and hot content in the past 10 days to help you better understand this process.

1. Structure and disassembly tools of universal wheel

Universal wheels usually consist of wheels, brackets and fixtures. The following tools are required for disassembly:

2. Disassembly steps of universal wheel

1.Check the fixation method: The fixing methods of universal wheels are usually divided into two types: screw fixing and buckle fixing. The universal wheel fixed by screws needs to be loosened with a screwdriver; the universal wheel fixed by buckles needs to be pulled out or rotated hard.

2.Remove the screw-fastened caster wheel:

• Use a screwdriver to loosen the set screw counterclockwise.
• If the screws are corroded, spray lubricant and wait a few minutes before trying again.
• After the screws are completely loosened, gently pull out the universal wheel.

3.Remove the snap-fastened caster wheel:

• Hold the wheel bracket and pull upward firmly.
• If it cannot be pulled out, try rotating the wheel left or right until the buckle is released.

4.Clean mounting holes: After disassembly, check the mounting holes for residue or rust and clean them with a cloth or brush.

3. Hot topics and content in the past 10 days

The following are some of the hotly discussed topics on the Internet in the past 10 days for your reference:

4. Precautions

1. Avoid using excessive force when disassembling to avoid damaging the wheels or brackets.

2. If the wheels are severely rusted, it is recommended to use professional lubricants or seek help.

3. When installing new wheels, make sure they are in the correct direction and avoid installing them backwards.

5. Summary

Disassembling the caster wheel is not complicated, you just need to master the correct methods and tools. Through the introduction in this article, you can easily complete the removal and replacement of the universal wheel. At the same time, paying attention to hot topics and hot content can also help you learn more about home repair and DIY skills.